LED Highbay Lights adopting high-strength die-casting aluminum shell, pull casting aluminum radiator, high-efficiency reflector, external electrostatic thermoplastic spraying, corrosion-resistant, impact-resistant, firm and durable.

Product characteristics :

  1. LED plane integrated light source, low thermal resistance, low temperature rise, the lamp shell is part of the radiator, direct thermal conductivity.
  2. LED industrial and mining lamps using wide voltage design, voltage fluctuations in the total power of the lamp body basically no change, to avoid strobe, to protect workers using the stability of the lighting environment.
  3. Does not absorb dust, no mosquitoes, eliminating the need to frequently clean the light source lamp body trouble.
  4. Compared with traditional halogen lamps and high-pressure sodium lamps, the use of LED plane integrated light source non-polluting materials and ultraviolet infrared radiation, creating a healthy and comfortable workshop environment.
  5. Make full use of LED instant start advantage, in a large area of the use of LED industrial and mining lamps and lanterns place instant start lamps and lanterns, improve work efficiency.

Scope of application :

Mainly applicable to warehouses, supermarkets, large workshops, steel mills, shipyards, aircraft manufacturing plants, large machinery manufacturing plants, hardware workshops, warehouses, highway toll booths, gas stations, large supermarkets, exhibition halls, gymnasiums, automobile waiting halls, railway station waiting halls, and other places that require high spatial lighting.

What is the installation spacing of LED industrial and mining light?

  • LED industrial mining light 30W recommended installation height: 3m installation spacing: 10-15m
  • LED industrial mining 40W recommended installation height: 4m installation spacing: 15-20m
  • LED industrial mining 45W recommended installation height: 5m installation spacing: 15-18m
  • LED industrial and mining light 50W recommended installation height: 6m installation spacing: 18-22m
  • LED industrial mining 55W recommended installation height: 7m installation spacing: 20-23m
  • LED industrial and mining light 60W recommended installation height: 8m installation pitch: 23-25m

Precautions

1.LED industrial and mining lights and drive power supply must be installed in an open location, conducive to heat dissipation

2.To regularly clean up the dust of the LED lamp and drive power to ensure good heat dissipation.

Interval 4~6 meters a can, if you want to brighten some, according to 4 meters is 16 square each, 80 * 100/16 = 500 lights if not too bright, according to 6 meters is 36 square each, 80 * 100/36 = 222 lights!

Generally used in mines, warehouses and other places, that is, need to be lit for a long time, the color rendering index requirements are not high places. Good manufacturers of this definition is not very accurate, mainly depends on your positioning of the price of the product, good materials will of course give a good product with quality assurance.

How to buy LED industrial lights in industry a few ways

As ordinary consumers, we choose the product may be more to consider the price of the product, followed by the appearance of the quality and so on, sometimes the price exceeds the budget, will choose to give up the acquisition of the product. But the industrial choice of LED industrial and mining lights must be light on the price factor, not not pay attention to the price, but to choose a more cost-effective products. How can we choose a product more suitable for our needs? Here is a brief introduction to the purchase method.

First, according to the actual needs of the choice

Like coal, petroleum, chemical and other industries to choose mining lamps not only to consider whether the lighting needs to meet the requirements, but also dustproof, waterproof and other factors, and even need to consider the explosion-proof requirements. This point restricts our choice of LED lamps and lanterns of the first major elements, the purchase of general industrial and mining lamps, in terms of energy saving can not meet the requirements to buy lamps and lanterns with cheap expensive; choose ordinary LED lamps and lanterns may be acceptable price, but the use of security is not guaranteed, lamps and lanterns three days to replace, will bring a lot of inconvenience to our work, the general height of the plant is relatively high, the replacement of the lamps and lanterns need to use the professional escalators or Lift trucks, which increases our invisible input costs. Therefore, this kind of enterprises need to consider whether the product is in line with national quality standard requirements, is not through the explosion-proof certification and other factors.

Second, consider the comprehensive cost-effective choice

LED lamps, especially through the explosion-proof certification, military certification, quality system certification of LED lamps, because in the productionand selection of materials will be strictly enforced by the national standards, will not cut corners with inferior means to reduce product costs, so the price may be higher than the general lamps. However, the purchase of an investment in exchange for high-quality products, the use of not only saves the cost of electricity, but also saves the cost of lamps and lanterns to buy a second time, maintenance and replacement costs, the key is to provide a reliable guarantee for our safety production.

Third, the appropriate power, illuminance and color temperature

This point is particularly professional, the power of LED lamps should be selected according to the actual lighting area, high power will cause a waste of electricity resources, power is low and can not meet the lighting requirements; in addition to the illuminance of the lamps and lanterns, color temperature and other conditions are also very important, the production line requires a high resolution, such as the textile industry requires high-resolution lamps and lanterns, this is what we would recommend the use of the color temperature value of 6000, illuminance and other conditions meet the requirements of the product. conditions are in line with the requirements of the product.

Similar Posts